11256 Throttle Body Spacer Compatible with GM Truck 4.8L, 5.3L, 6.2L 2007-2012 Replacement for Spectre Performance
R 1,545
or 4 x payments of R386.25 with
Availability: Currently in Stock
Delivery: 10-20 working days
Please be aware orders placed now may not arrive in time for Christmas, please check delivery times.
11256 Throttle Body Spacer Compatible with GM Truck 4.8L, 5.3L, 6.2L 2007-2012 Replacement for Spectre Performance
Contains instructions and necessary gaskets and hardware for easier installation.
Manufactured from the machined aluminum.
Improve engine performance and enhance your driving experience.
After the installation is completed, the vehicle needs to be shut down and re-checked to ensure that all bolts and hose clamps are fully tightened to ensure driving safety.
Cold operation is required during operation to avoid burns
Parts List 1-Spectre Power Plate 1-1" Extension bracket 4-M6-1.0×70mm hex bolts 4-M6 flat washers 4-M6 lock washers 1-M6 flat screw 1-Gasket Installation Instructions Step 1 : Disconnect the negative battery cable. Step 2 : Remove the engine cover. Step 3 : Separate the upper radiator hose clip from the intake tube. Step 4 : Remove the two 10mm bolts & two 10mm nuts which secure the throttle body to the intake manifold. Step 5: Using a 4mm socket, remove the two studs that previously held the throttle body to the intake manifold. Step 6 : Using the supplied bolts, washers, and gaskets, install the Spectre Power Plate. Step 7 : The ball stud (from step 3)must be relocated. Step 8 : Reinstall the intake assembly by placing it over the throttle body, MAFS, and the ball stud. Step 9 : Fully tighten the clamps securing the intake assembly to the throttle body and MAFS. Step 10 : Install the C.A.R.B. exemption label near the factory emission label. Step 11 : Reconnect the negative battery cable. Step 12 : Start the engine and let the vehicle warm up. Shut the vehicle off and recheck your installation, making sure that all bolts and hose clamps are fully tightened.