Get ready: You will receive：a set of living puppet toys，2.5m spare hidden wires，two hooks，a rubber plug,two stickers.
The wooden blocks are placed upright as shown in the figure，and the three positions in the middle can be changed.Standby concealment provided The length of the line is about 2.5m，and the actual cut is 60cm.The hidden line is connected to the bottom of the wood block. As shown in Figure 1, after one end of the hidden line passes through all the wooden blocks, wounding it in the groove of the rubber stopper (more turns, in order to be stronger). As shown in Figure 3, the rubber is inserted into the bottom end of the wooden block hole, leaving a section of the wire (as shown), in order to fix the hidden line, to prevent the hidden line from falling off during the performance. Finally, stick the sticker on the bottom and cover the rubber plug and the hidden line..As shown in Figure 4.Tho hook is hooked to the ear and lifted up to check whether the hidden line will break"
"Performance：
The hook hooked on the ear.The body leans forward or raises its head to control the whole set of puppets to stand upright，rise or fall or fall.
1：Jumping puppets
Take out the wooden hammer.The whole set of puppets stands upright on the table.As shown in the figure，the hammer hits the bottom block while raising its head slightly.The hammer can't hit the block. It looks like a puppet can jump.
2：Living puppets Tilt forward slightly，pick up the whole set of blocks，and hammer away at the bottom.The head was slightly picked up and the piece of wood that had been removed came back.Complete Set：Stop Again I have got up.This is the living puppet.
Recommendation：1.More exercises to control the rise and fall of wood blocks.2 .The lighting of the performance room or stage should not be too bright.3. The performance suggests wearing dark clothes.4 The distance between the performance and the audience should be at least 3
