ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin, High

ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin, High Precision & Rapid Photopolymer for LCD/DLP/SLA 3D Printing(Translucent Green, 500g)
- Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.
- Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
- Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.
- Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with all DLP/LCD 3D printers, works best with ANYCUBIC LCD 3D printers, multiple colors for your choice. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a tight-fitting air bag. No worries for leakage.
Note:Two kinds of bottles with same 500g resin will be send randomly.
Parameter information:
Size: ~500g/500ml
Color: Black,White,Grey,Yellow,Green
Main materiaal: resin monomer , photoinitiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Warranty: 12 months

Resin parameters:
Solidify wavelength: 405nm
Hardness (D): 79.0
Viscosity (25C): 552.0 mpa.s
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3
Flexural strength: 23.4 Mpa
Tensile strength: 23.4 Mpa
Elongation frequency: 14.2 %

Precautions:

1. Storage
1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)
2) It is recommended to store the resin under 15C -35C in a sealed container.
Avoid any dusty or moist environment.

2.Usage:
1) Shake well before use. Avoid any direct sunlight during usage.
2) Do not put in the mouth. Keep it away from the children.
3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.
5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.
6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues.

3. DLP printer how to choose corresponding UV resin.
Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incor
Country USA
Brand ANYCUBIC
Manufacturer ANYCUBIC
Binding Misc.
ItemPartNumber ABYCUBIC Resin-1
Color Translucent Green
Size 500g
UnitCount 1
UPCs 605175684811
EANs 0605175684811
ReleaseDate 0000-00-00

Country	USA
Brand	ANYCUBIC
Manufacturer	ANYCUBIC
Binding	Misc.
ItemPartNumber	ABYCUBIC Resin-1
Color	Translucent Green
Size	500g
UnitCount	1
UPCs	605175684811
EANs	0605175684811
ReleaseDate	0000-00-00

ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin, High Precision & Rapid Photopolymer for LCD/DLP/SLA 3D Printing(Translucent Green, 500g)

You might also like...