AUTOOL 12V Automotive Fuel Leak Detectors, Smoke Leak Locator Tester,Fuel Leak Detectors, Car PIPE Leakage Tester Support EVAP For All Vehicles
RÂ 7,762
or 4 x payments of R1,940.50 with
Availability: Currently in Stock
Delivery: 10-20 working days
AUTOOL 12V Automotive Fuel Leak Detectors, Smoke Leak Locator Tester,Fuel Leak Detectors, Car PIPE Leakage Tester Support EVAP For All Vehicles
🌹 WORKING PRINCIPLE -- The Smoke Machine heat up special oil(mineral oil or baby oil) into smoke and blow smoke into sealed pipe system. You will find out leak point in pipe in where has smoke. Please repair the part where leakage exists.
🌹 CONVENIENT TOOL FOR MACHANICS -- The SDT-202 is a simple-using Smoke Machine for techs to detect the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
🌹 EVAP SYSTEM SUPPORTED -- Comes with EVAP adapters, SDT-202 can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 1.2m/48inches smoke outlet pipe can help reach and connect perfectly.
🌹 SPECIFICATIONS -- Voltage: DC 12V(Supplied by Automotive Battery). Smoke Output Value: 10-15L/min. Output Pressure: 10-13PSI. Heating Material: Mineral Oil or Baby Oil. Multi Protections: Over-heat & Over-load Protection.
🌹 3 YEARS WARRANTY -- 3-7days fast shipment via DHL. To ensure your high-quality shopping experience, we provide 3 years warranty(longer than competing machines). 24 hours E-mail supports can help resolve any issues of using. Buy and use with confidence.
Cautions:
1.When you use this detector the first time, please fill 20-30ml oil, not beyond this range. 2.New oil can be filled with only when the smoke is light,and it can't be filled over 15ml every time. 3.Before filling new oil, please pour out the remaining oil in the detector. 4.Please replace the detector oil regularly.
How to Use:
1.Open the engine cover, and hang the detector in the cover. 2.Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle. Please secure the other side with a rubber stopple. 3.Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4.Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5.Turn on the power switch, and detector starts to work. 6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7.After leak detection, please connect well the wires and pipe. * Do not run the detector over 8 minutes. It needs interval rest. * The detector has protector. If it exceeds working limit, it will power off automatically. In this condition, please operate it later. * The round parts of this detector is with temperature, be careful to avoid scalding injury.
Package List:
1.Main Unit 2.Hook 3.Rubber stopples 4.Taper stopple 5.Taper pipe 6.30ml oil bottle 7. User manual