BACOENG 1.5 HP Stainless Steel Clean/Dirty Water Submersible Sump Pump 4000GPH w/ 33FT Cable and Float Switch

Material: Metal, Thermoplastic

Weight: 4KG, Power: 400W

Voltage/Frequency:115V/60HZ

Head MAX:5M, Capacity: 7500L/H

Horsepower: 1/2 HP, Max Flow Rate: 2000GPH

Max Lift: 16.4 Feet

Power Cord Length: 33 Feet

Discharge Size : 1.5"

Warranty: one-year

Package size: 8.7 x 6.7 x 13.5 inches(L X W X H)

PRODUCT FEATURES

Available Places: Swimming pool, Pond, flooded area.

Thermoplastic body protect the metal parts from corrosion.

The pump give you the excellent ability to drain cellars, swimming pool or garden ponds.

Thermal overload protection make sure the pump operates within spec for longer durability.

Package Content: 1 x Clean Water Pump, 1 x User Manual

Operation Tips

The max flow is of the pump is 2000GPH (7500L/H). But the height should be close to 0 meter and use the discharge port of 1.5 inch.

That means if you want the flow be bigger, the height of the water you put the water pump into should be lower, and using the 1.5 inch discharge port.

Notice:Floating ball must be kept up when the pump works. once the floating ball is down to the initial water level (about 3.9 inch), the pump will automatically shut down. When the water level is below 3.9 inch and above 1.57 inch, you must hang the float up to continue the pump working. The minimum level floating ball can be drawn to is about 1.57 inch. When the water level is below 3.9 inch, it is best for us to take care of the pump, so that once the pump can not pump any water,the power must be cut off immediately.If not, that will lead to the coil inside the pump burned,Which causes a lot of moister internally.