BACOENG VITON 3/8" Brass Electric Solenoid Valve, 12V DC Normally Closed

BACOENG VITON Normally Closed Electric Solenoid Valve;

3/8"ports, BRASS body, Viton seals, 12 volt DC, for air, water, or fuel

This electric solenoid valve is constructed with a high-quality brass body, two-way inlet and outlet ports with one-quarter inch (3/8") female threaded (NPT) connections, and heat and oil resistant Viton seals.

The coil uses alternating current and energizes at 12 volts DC; voltage range + or - 10%. 18 Watt power rating.

Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI.

3/8" (14 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv).

Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.

Manufactured in China. Model: USS2-00066. Quality assurance and/or conformity managed in accordance with standards:

ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.