BETAFPV 1S Lipo LiHV Charger Board 1S LiPo Battery Charging

BETAFPV 1S Lipo LiHV Charger Board 1S LiPo Battery Charging Plate 4.2V/4.35V for Tiny Whoop Blade Inductrix JST-PH 2.0 Micro-JST 1.25 HV Lipo Battery

BETAFPV 1s Lipo LiHV Charger Board - Charge up to 6 Lipo or HV Lipo batteries at once! Designed for Inductrix, Tiny whoop, Blade Nano QX FPV etc

This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home. Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!

Specification:
Weight: 36g
Dimensions: 75x42x17mm
Input: 3s - 4s Selectable
Cutoff Voltage: 10.8v (3s), 14.4v (4s)
Output: Fixed at approx 400 milliamps
4.20v cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35v cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter

Note: Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.

Package:
1 * BetaPower 1s Lipo LiHV Charger Board by BETAFPV
Country USA
Brand BETAFPV
Manufacturer BETAFPV
Binding Electronics
ItemPartNumber 00312794
Model 4330842950
UPCs 607994916814
EANs 0607994916814
ReleaseDate 0000-00-00

Country	USA
Brand	BETAFPV
Manufacturer	BETAFPV
Binding	Electronics
ItemPartNumber	00312794
Model	4330842950
UPCs	607994916814
EANs	0607994916814
ReleaseDate	0000-00-00

BETAFPV 1S Lipo LiHV Charger Board 1S LiPo Battery Charging Plate 4.2V/4.35V for Tiny Whoop Blade Inductrix JST-PH 2.0 Micro-JST 1.25 HV Lipo Battery

You might also like...