Runcam TX200U FPV Transmitter 1S 3.5-5.5v 5.8G 48CH 25/200mW

Runcam TX200U FPV Transmitter 1S 3.5-5.5v 5.8G 48CH 25/200mW Video Transmitter for Nano/Micro Sparrow/Micro Swift 2/Micro Eagle

parameter
Working Current: 5V150~400mA
Video Input Impedance: 75 Ohm
Frequency Channel: 5.8G 48CH
Voltage out: 5Vmax 250mA / Voltage in: 1S 3.5-5.5V
Antenna: U.FL 5.8G 2dB Omni antenna
Lightweight: 2.5g (with antenna), PCB Size: 19mm*19mm

Frequency Setup
Lock mode:
Red LED flashes, only 25mW Bandamp; limited frequency available;
Unlocked mode:
Red LED keeps on, 200mW Bandamp; all 48 channels available; By long pressing button for 10 seconds, you can switch between the two modes.

Note:
Before you get TX200 unlocked, it is highly recommended to know about the rules and regulations in your country about the frequency to avoid a fine or confiscation of your device.
1 Blue LED for Channel
Short press the button to switch the Channel, Channel 1/2/3/4/5/6/7/8 in sequence. For each short press, the Blue LED flashes once, and only when it's under the Channel 1, the LED is always on.
6 Red LED for Band
Long press the button two seconds to switch the Band, Band 1/2/3/4/5/6 in sequence.For each long press, the six Red LEDs light in turn.
1 Orange LED for Power
Long press the button five seconds to switch the power, on is 200mw, oï¬€ is 25mw, lock mode is limited to 25mw.

Remote control
If you need to get 200mW Bandamp; all 48 channels unlocked, please long press the button on VTX for 10 seconds till the red LED is always on.

Package Including
1 * TX200U Transmitter
1 * Set of screws
Country USA
Brand Crazepony
Binding Electronics
ItemPartNumber JO5P04M1349IAE
UPCs 702646056075
EANs 0702646056075
ReleaseDate 0000-00-00

Country	USA
Brand	Crazepony
Binding	Electronics
ItemPartNumber	JO5P04M1349IAE
UPCs	702646056075
EANs	0702646056075
ReleaseDate	0000-00-00

Runcam TX200U FPV Transmitter 1S 3.5-5.5v 5.8G 48CH 25/200mW Video Transmitter for Nano/Micro Sparrow/Micro Swift 2/Micro Eagle

You might also like...