DITRIO 6pcs RGB Neon LED Light Strips SMD 5050 Including 6pcs of 1-2 Way Y Splitters for Motorcycles ATVs UTVs Golf Carts

Here are some useful tips that are good know:

1. AVOID THE ENGINE

- Don't stick a LED strip directly on the surface of your engine; the heat will melt it.

2. PICK A UNIFIED, CLEAN AND DRY SURFACE

- To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.

- Consider to use surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.

3. APPLY PRESSURE AT LEAST 3 SECONDS

- Firm application pressure develops better adhesive contact and helps improve bond strength.

4. WAIT FOR OPTIMUM ADHESION

- The bond strength will increase as the adhesive flows onto the surface.

- Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24hours and 100% after 72 hours.

5. CUT A STRIP SHORT

- You can cut a strip short to fit a specific spot;

- There are 4 welding points between everything 3 LEDs; cut at the marking line on these 4 welding points. 

6. CONTACT DITRIO IF COLORS ARE WRONG

- There are 4 pins inside a fast locking connector, and 3 of them are for managing colors

- There is no a universal standard for the sequence for these 4 pins, and each maker makes it their way

- If you have a kit from another brand and you see colors are wrong after adding our individual strips, probably the pins' sequence is different

- In this case, please contact DITRIO and we will make it right for you.

Last but not least, if you have some great ideas, feel free to try and we will always give you support!

Make your bike the most amazing!