EASY STORAGE and REUSABLE: Springs can be stored in drum to keep it tidy than conventional drain snake hair drain clog remover cleaning tool, and reuseable drain cleaner.
FLEXIBLE and ENVIRONMENTAL-FRIENDLY: Flexible spring inside, which can be easily bent 90 degree which is suitable for most of the drain cleaner, and it is environmental-friendly, no toxic chemicals needed;
USAGE: Drum Auger suitable for plumbing snake pipe cleaner, sewer, bathtub/bath/bathroom/shower snake, kitchen sink, downspouts, central vacuums cleaning etc, how great plumbing tools, can work with Drain Opener perfectly ;
100% RETURN GUARANTEE: feel free to contact with if you face any problem, have a good day with OnlyYou plumbers snake.
The Drain Auger is the perfect tool to clear blocked drains at an economical price. 1/4-Inch x 25-Feet spring cable. Clears small and medium household drains up to 25-Feet. High quality polymer housing with screw construction for long lasting durability.
Specifications:
-Diameter.: 6 mm (1/4")
-Spring cable length: 7 m (25 ft)
-Grip handle: ABS Pistol
-Cable material: Steel wire
Operation Guidelines
1.Hold the wire and loosen the screw to allow the wire to be pulled out of the housing.
2. Pull the wire out and push it into the pipeline.
3. If you can't get the wire into the pipeline or get to a blockage in the pipe, then tighten the screw and press the handle and wire toward the pipeline while turning the hand crank clockwise to break up the blockage until the wire can move forward into the pipeline. You can fill the pipeline with some water to help remove the blockage, but only if the blockage has been partly moved at least. If all goes well, the blockage will be washed away and the pipeline will be unplugged.
4. Once the wire is able to continue to move forward into the pipeline, you can then loosen the screw and continue to repeat the above steps 1-4 until the wire gets through all the blockages
5. [IMORTANT] When you have successfully removed the blockage in the pipeline, you can pull the wire out and clean it thoroughly with water. After the wire is dry, you need coat the wire with oil before pulling the wire into the housing to help keep it from rusting