Frebw 5 in 1 Stud Detector TH430, Smart Stud Finder with HD

Frebw 5 in 1 Stud Detector TH430, Smart Stud Finder with HD LCD Display, Wall Scanner Detector for Metal Wood Wire and Cable Rebar, Precise Positioning
- 【5 Scanning Modes】 The center of the wooden stem can be detected and the wall thickness is 1/2 inch (13 mm);Detectable wood stem center with a wall thickness of 1 inch (25 mm); Detectable wood stem center with a wall thickness of 1 1/2 inches (38 mm); Detects iron, lead, aluminum and other metals with a wall thickness of 2.36 inches (60 mm); Detectable live wires in the wall, the wall thickness is within 2 inches (51 mm)
- 【 Digital LCD Display 】 LCD detection mode, signal strength, with maximum readability. Provide a clear appearance even in low light conditions, indicating detection mode, center pointing, low battery indication, etc. Detect the exact location of the objects.
- 【SOUND WARNING】When finding the objects, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The audible and visible cues reliably keep users informed when an object, such as metal, studs, AC live wiring gets found.
- 【High Precision Automatic Calibration Finder】The wall detector stud detector calibrates automatically when it is turned on. Calibration is done by positioning the device on a wall without studs, AC wires or metal. The stud detector will indicate if it has been calibrated. Automated calibration, providing maximum reliability to the user, greatly reducing errors in the application and ensuring that most objects behind the wall can be detected.
- 【Easy Useful FAST】Stud Detector Wall Scanners locate metal studs, pipes, steel bars, walls, joists behind floors and ceilings, and the edges and center of live AC wires quickly. Fast detection saves users time and effort, which makes task completion easier. Covered by one year's hassle-free warranty.
Operation Tips of Using the Stud Detector:

1. Make sure your fingertips are resting on the handle and not touching the surface being scanned or the scanning head of the tool
2. Hold the tool straight up and down, parallel to the studs, and don't rotate the tool
3. Keep tool plat against the wall and don't rock and press hard when slowly sliding across the surface being scanned
4. Avoid placing your other hand or any other part of your body on the surface being scanned
5. If you receive erratic results, it may be a result of humidity, moisture within the wall cavity or drywall, or recently applied paint or wallpaper that hasn't fully dried. In this case, pls allow a few days for the wall to dry out
6. Depending on the proximity of electrical wiring or pipes to the wall surface, the scanner may detect them in the same manner as the studs. Caution should always
be used when nailing, cutting, or drilling in walls, floors, and ceilings that may contain these items
7. To avoid accidents, remember that studs or joists are normally spaced 16 or 24 in (41 cm-91 cm) apart and are 38 mm in width. Anything closer together or a different
width may not be a stud, joist, or firebreak. Always turn off the power when working near electrical wires
8. Please kindly read the instructions before operation.
WARNING:

Do not rely exclusively on the detector to locate items behind the scanned surface. Use other information sources to help locate items before penetrating the surface. Such additional sources include construction plans, visible points of entry of pipes and wiring into walls, such as in the basement, and in standard 16 and 24 in. (41 and 61 cm) stud spacing practices.
Country USA
Brand Frebw
Manufacturer Frebw
UPCs 794604232041
EANs 0794604232041
ReleaseDate 0000-00-00

Country	USA
Brand	Frebw
Manufacturer	Frebw
UPCs	794604232041
EANs	0794604232041
ReleaseDate	0000-00-00

Frebw 5 in 1 Stud Detector TH430, Smart Stud Finder with HD LCD Display, Wall Scanner Detector for Metal Wood Wire and Cable Rebar, Precise Positioning

You might also like...