HQRP D-Size 3.6V Lithium Thionyl Chloride Battery Compatible

HQRP D-Size 3.6V Lithium Thionyl Chloride Battery Compatible with DSC ER34615M-T1 WT4911 WT4911B WT8911 ALEXOR Wireless Outdoor Siren WT4911BATT ADT
- HQRP® Battery Replacement;
- Battery Voltage: 3.6V; Capacity: 14.5 Ah; Li-SOCI2; Lithium Thionyl Chloride;
- Compatible with Original Battery; 200 Days Warranty!
- Compatible with DSC ER34615M-T1 WT4911 WT4911B WT8911 Wireless Outdoor Siren WT4911BATT ALEXOR ADT;
- Please pay attention: The security panel will indicate when the battery is low and requires replacement. After removing the battery, wait no less than 30 seconds before inserting the replacement battery. The WT4911 contains a battery that includes a feature called ‘passivation’. This feature preserves the shelf life of the battery when it is not being used. Every WT4911 will need to be ‘depassivated’ before using the outdoor siren for the first time.
- Make sure to follow the steps below for a brand new battery on the unit or if a battery is being replaced. The WT4911 could lose power prematurely if a brand new battery is not used. 1. Hold the tamper switch closed before plugging the battery in. 2. Plug in the battery AND continue to hold the tamper for 10 seconds before releasing it. 3. Once the tamper is released, after the initial 10 seconds, the siren flashes the strobe in several different patterns to indicate it is in depassivation mode.
- 4. When depassivation is complete, the strobe lights shut off and the siren starts to beep 3 times every 5 seconds. NOTE: It can take a unit up to 30 minutes to fully depassivate a battery. If the WT4911/WT8911 determines that depassivation is not complete at the end of 30 minutes, it will automatically stop trying and beep once every 5seconds. If this occurs, the battery should be replaced.
- 5. Push in and then release the tamper switch. The WT4911/WT8911 will go into a normal power up sequence with 6 short beeps and flashes of the strobe lights. 6. The WT4911/WT8911 is then ready to be enrolled on the system or returned into service;
Compatible With: DSC ER34615M-T1 WT4911 WT4911B WT8911 Wireless Outdoor Siren WT4911BATT ALEXOR ADT. Please pay attention: The WT4911 contains a battery that includes a feature called 'passivation'. This feature preserves the shelf life of the battery when it is not being used. Every WT4911 will need to be 'depassivated' before using the outdoor siren for the first time. NOTE: Make sure to follow the steps below for a brand new battery on the unit or if a battery is being replaced. The WT4911 could lose power prematurely if a brand new battery is not used. 1. Hold the tamper switch closed before plugging the battery in. 2. Plug in the battery AND continue to hold the tamper for 10 seconds before releasing it. 3. Once the tamper is released, after the initial 10 seconds, the siren flashes the strobe in several different patterns to indicate it is in depassivation mode.
Country USA
Brand HQRP
Manufacturer HQRP
Binding Camera
ItemPartNumber 887774401171891
Model 887774401171891
Warranty 200 Days warranty
Size D
UnitCount 1
UPCs 887774261918
EANs 0887774261918
ReleaseDate 0000-00-00

Country	USA
Brand	HQRP
Manufacturer	HQRP
Binding	Camera
ItemPartNumber	887774401171891
Model	887774401171891
Warranty	200 Days warranty
Size	D
UnitCount	1
UPCs	887774261918
EANs	0887774261918
ReleaseDate	0000-00-00

HQRP D-Size 3.6V Lithium Thionyl Chloride Battery Compatible with DSC ER34615M-T1 WT4911 WT4911B WT8911 ALEXOR Wireless Outdoor Siren WT4911BATT ADT

You might also like...