Hakko FM203-DP ESD-Safe Dual Port Soldering Station with Two FM2027 Soldering Irons A wide range of handpiece selection Figures of connectable handpieces are shown on the connectors as well as the indications of Channel D and Channel S. Buzzer ON/OFF setting is available Whether to make the buzzer sound or not when an error occurs or a target temperature is reached is settable. Power Save Function A programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. A single station plays multiple roles: Soldering, desoldering, and SMD rework The Hakko FM-203 is a Dual Port high performance soldering station. Even when soldering lead-free solders the high performance allows lower operating temperatures. The soldering station can operate any of the following hand pieces, FM-2027 Soldering Iron, FM-2022 Parallel Remover (SMD tweezer), FM-2023 Mini Parallel Remover (SMD mini tweezer), FM-2024 Desoldering Module, and/or FM-2026 Nitrogen Soldering Iron. The soldering iron and desolder tool can be used in either or both ports and the tweezers are limited to one port with a soldering or desoldering iron in the other port. The station features a programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. Sleep mode, auto power shut off and tip temperature can be programmed separately for each port. The sleep mode reduces the tip temperature to approximately 200ºC (400ºF) after the programmed time (0-29 minutes). The lower tip temperature will reduce oxidation of the tip and improve the tip performance. When in sleep mode the tip will quickly return to temperature after the iron is removed from the holder. Two handpieces can be selected in various combinations *This station is equipped with two HAKKO FM-2027 handpieces. A wide range of handpiece selection - Figures of connectable handpieces are shown on the connectors as well as the indications of Channel D and Channel S