STANCEMAGIC Hubcentric Rings (Pack of 4) - 60.1mm ID to 73.1mm

STANCEMAGIC Hubcentric Rings (Pack of 4) - 60.1mm ID to 73.1mm OD - Silver Aluminum Hubrings - Only Fits 60.1mm Vehicle Hubs and 73.1mm Wheel Centerbore - Compatible with Toyota and Lexus vehicles
- StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
- HUB RING INNER DIAMETER: 60.1mm (Your vehicle's hub lip diameter needs be this size)
- HUB RING OUTER DIAMETER: 73.1mm (Your wheel's center bore needs to be this size)
- Compatible with Toyota 2001-2021 Highlander, 2004-2015 Tacoma (2.7 2WD & X-Runner Only), 1995-2021 Avalon, 1976-1985 Celica. Compatible with Toyota 1992-2021 Camry, 1996-2021 Rav4, 1990-2000 MR2 (2.0 Only), 1999-2008 Solara, 1986-2002 Supra. Compatible with Lexus RC200t RX300 RX330 RX350L RX400h RX450h ES300 ES330 ES350 GS200t GS300 GS350 GS400 GS430 GS450h. Compatible with Lexus IS200t IS250 IS300 IS350 LS400 LS430 SC300 SC400 SC430 NX200t NX300.
- IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
What are Hub Centric Rings?
(Also called hubrings, hubcentric rings, centering rings)
This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.

Why do I need it?
You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.

How can I confirm fitment?
- Hubrings have 2 measurements, typically in millimeters (mm).
- The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 60.1mm. This should match your vehicle's hub bore.
- The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 73.1mm. This should match your wheel's centerbore.

Compatibility Information:
These hubrings can fit Toyota and Lexus vehicles with a 60.1mm Hub. Your Wheel Bore must be 73.1mm. Message us with year/make/model if you have any fitment questions.

Important Fitment Notes - Required Buyers Check These Before Purchasing
- Buyers must ensure their Vehicle's Hub is 60.1mm.
- Buyers must ensure their Wheel's Centerbore is 73.1mm.
- If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.

Installation Advisory
Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.

Country	USA
Brand	StanceMagic
Manufacturer	StanceMagic
Binding	Unknown Binding
ItemPartNumber	AL-HR-73.1>60.1
Model	AL-HR-73.1>60.1
Warranty	1-Year Limited Warranty covering manufacturing defects
Color	Silver
Size	60.1mm ID to 73.1mm OD
ReleaseDate	0000-00-00

STANCEMAGIC Hubcentric Rings (Pack of 4) - 60.1mm ID to 73.1mm OD - Silver Aluminum Hubrings - Only Fits 60.1mm Vehicle Hubs and 73.1mm Wheel Centerbore - Compatible with Toyota and Lexus vehicles

You might also like...