Designed for specially formulated to prevent excessive over torque issues and has a very high static friction factor of 0.13, the unique blend of complex thickeners to help evenly distribute the copper flake unto the metal surfaces to eliminate metal to threaded metal contact. Recommended lubrication: stud threads shall be thoroughly lubricated on both ends, fill the threaded area "Root - to - Crest" on the stud/bolt. The nut will push the anti-seize down the threads as it travels. Bearing surfaces between nut and hardened washer or nut and flange should be lubricated with anti -seize in the area where the nut will rest against the flange or washer. Anti -seize on the assembly should be easily visible. Not recommended for: oxygen service or on zinc coated parts or fasteners. Not recommended for: oxygen service. Conforms to MIL-CID-A-A-59313. Personal precautions: wear gloves and protective overalls. Environmental precautions: do not allow it to enter drains. Spillage: scrape up bulk, then wipe up remainder with cloth. To prevent walking hazard, pick up remaining residue with diatomaceous earth. Handling: no special handling precautions necessary. Storage: do not store at temperatures above 100 degree F (38 degree c). Respiratory protection: none needed. Hand protection: protective gloves for hypersensitive persons. Eye protection: glasses, if applied to parts in motion. Body protection: overalls. Main hazards - health effects eyes: may cause irritation. Inhalation: viscous nature may block breathing passages if inhaled. Ingestion: may cause diarrhea. Skin: for hypersensitive persons, may irritate the skin after prolonged periods of contact. Appearance: grey. K-Factor: 0.13. Service rating: -65 degree F (-54 degree C) to 788 degree F (420 degree C). Eco certified. Size: 1 lbs Plug top can.