KIPA R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Combo Filter For Automotive Racor R12T 10 Micron Marine Diesel Engine 3/8 Inch NPT Outboard Motor Durable Spin-on Housing
R 1,010
or 4 x payments of R252.50 with
Availability: Currently in Stock
Delivery: 10-20 working days
KIPA R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Combo Filter For Automotive Racor R12T 10 Micron Marine Diesel Engine 3/8 Inch NPT Outboard Motor Durable Spin-on Housing
This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water
Notice: This a separator for Diesel & Water, It could not be for Petrol & Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Filter Assy
Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. Don't be caught in the water without one of these diesel spin-on filters
Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well, 10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from gasoline
The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance,instruction: 1.Nylon collection bowl down when installed the water separator and filter. 2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them. 3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.
Notification: 1.Don't be caught in the water without one of these Diesel spin-on filters. 2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, Engine will perform better than ever with clean, water-free Fuel. 3.The inlet & outlet can be feed in on the same side or in one side out the other side.
R12T Water separator & filter complete combo installation instruction: 1.Nylon collection bowl down when installed the water separator and filter. 2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them. 3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs. 4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Maximum Flow Rate 30 GPH (57 LPH) Filter Rating 10 Micron Port / Connecting Size M18 X 1.5 Center Thread