MARQ Fog 400 LED | 400W Water-Based Special Effects Fog Machine with Red-Color LED Lights (Red)

For those moments when you need the perfect special effect, the MARQ Fog 400 LED delivers 1500 cubic-feet per minute of mood-inducing fog at the touch of a button.

Unlike other inexpensive foggers, it has three single-color LEDs, and the included wired remote makes operation a snap.

Fog 400 LED comes in four different housing colors, so it always fits right in.

Note: MARQ’s water-based Fog Fluid Gallon, Fog Fluid Quart, and Fog Fluid 12oz sold separately.

 

Frequently Asked Questions 

 

How do you know when the Fog 400 is ready for use?

Here are some simple steps to setup your Fog 400.

1. After unpacking the box, unscrew and remove the cap at the top of the tank.
    
2. Fill the tank with a water-based fog fluid.
    
3. Screw the cap back onto the top of the tank so it is secure.
    
4. Connect Fog 400 LED to a power outlet.
    
5. On the rear panel, set the Power Switch to the On position.  The Fog 400 LED will begin warming up. Important: If the environment is significantly colder than the temperature of Fog 400 LED, you may need to wait for it to adjust to the ambient temperature.
    
6. The light on the remote will light up when ready.

 

Why is there no fog coming out? 

This unit will pump out the fog only when the unit is heated up, and the when the light on the wired remote is illuminated.

When you plug in the Fog 400, it needs a few minutes to heat up in order to work.  If the light on the remote control turns off during operation, this means the pump has stopped so that the Fog 400 LED can re-heat.  The light will turn on again once it is ready to use.

Also, it is important to check the gauge on the back to make sure there is adequate amount of fluid.  

Never run this unit dry! 

 

What type of fluid should I use?

The type of fluid we recommend for the Marq Fog 400 is high-quality water-based fog fluid. You can purchase this from your local or online retailer.

 

When and what should I clean the Fog 400 with? 

You should clean the Marq Lighting Fog 400 after any heavy use, or at the end of the season.  

It is important to check the filter to make sure it is clean and not clogged.  We recommend using isopropyl alcohol to clean the filter and any other parts on the Marq Lighting Fog 400.  

Here is a short reference guide on how to clean the Fog 400 properly.

• After each use, power Fog 400 LED off, and wait for about 1 minute for it to cool down. Wipe its surfaces and empty tank using a soft, clean cloth.
• After every 40 hours of use, use Fog 400 LED as described above (in Setup and Usage), but use a mixture of 80% distilled water and 20% vinegar instead of the normal fluid. This will help remove build-up in the nozzle.

Important: Do not clean Fog 400 LED using solvents or harsh detergents.

 

Is the Fog 400LED available in different colors or come with different LED colors?

The Marq Fog 400 is available in Red, White, Blue and Black.  The Red Fog 400 has red LED's built in, the Blue Fog 400 has blue LED's, and the White and Black Fog 400 has amber LED's. 

 

My pump is clicking or ticking. Why?

If your Marq Fog 400 is making any clicking or ticking sounds, it actually means it is working correctly. Auto heat cycles on and off and can make noise while performing such an operation, similar to the clicking and popping of heating pipes in a house.

 

Further Technical Support

Whether you are a customer or dealer, if you already own a Marq product, or if you just have pre-sales questions, the Marq technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support. 

http://www.marqlighting.com/support 

 

Technical Specs

• Tank Capacity: 16.9 fl oz
• Remote Length: 3.3 feet
• Heat-up Time: 3 minutes
• Output: 1500 ft³/min
• Fluid Consumption: 0.13 fluid ounces/min
• Input Voltage Available in: 120 VAC, 60 Hz or 230 VAC, 50 Hz
• Power and Current: 400W 3.3A @ 120V, 60Hz
• Power and Current: 400W 1.7A @ 230V, 50Hz
• Weight: 3.8 lbs
• Dimensions(width × depth × height): 9.3” × 4.6” × 6.4” (including Mounting bracket)
• Package: 10.6” × 5.3” × 6.5”
• Fuse: 250V/5A

 

Box Contents

• Fog 400 LED (Black)
• Power Cable
• Remote Control (wired)
• User Guide
• Safety & Warranty Manual