PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little "shine" or "spark" to it.
Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.
FAQs:
Why can't the filaments stick to the build bed?
1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;
2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;
3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
4. If the effect is not good, it is recommended to try printing the draft before printing.
Specification:Â
TemperatureÂ
Recommended Extrusion/Nozzle Temp: 230°C - 250°C (446℉~ 482℉)
Heated Bed Temp: 80°C - 90°C (176℉~ 194℉)
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Filaments Net Weight: 3 kg (6.6 lbs)Â
Recommended Printing Conditions:
Cooling Fan: Turned on
Printing Speed: 30~50(mm/s)
Raft Separation Distance: 0.14(mm)
Retraction Distance: 1~3 mm
(Note：Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)
Packaging Included:
3 × spool of PETG filamentsÂ
3 × build surface
