Description
PEMENOL 12V WiFi Relay Switch Module Wireless Inching & Self-Locking WiFi Smart Relay Switch for DIY Smart Home Turn on PC Garage Door Compatible with iOS Android 2G/3G/4G Network
PEMENOL 12V WIfI Relay Switch Module function with remoto control via connecting APP of phone, compatible with iOS and Android 2/3/4G network, helping you to remotely control the connected home appliance on/off from anywhere at any time.
Pairing steps of WIFI relay module:
✯Step 1: Install and register APP eWelink from "APPStore" or "Google Play" or eWelink Official website, select the appropriate language.
✯Step 2: Connect DC 12V power supply on "12V" and "GND". (Note: Please don't connect load before select work mode and test.)
✯Step 3: Make WIfI relay module and phone connect to the same WIFI router.
✯Step 4: Open APP eWelink.
✯Step 5: Keep press the configuration button on module for more than 6 seconds. When the LED starts to flash and then Click "Add Device".
✯Step 6: Select "Touch" on APP and then input WIFI name and password.
✯Step 7: Waiting and configuring about 3 minutes.
✯Step 8: If the pairing fails, please try it several times.
✯Step 9: Reset the module device name after connection successfully.
✯Step 10:Test and set module.
NOTE:
It's a relay out put. So it cannot out putv oltage. It just like a switch. Workvoltage and load voltage are indispensable.
At first time when pairing, phone must be connected to WIFI from router. It is not need connect to WIFI after pairing success.
Parameters:
Work Voltage: DC 12V
Load Voltage: AC0-250Vac 0~30V
Work Current: 250mA
Load Current: 10A/Channel(MAX)
Quiescent Current: 90mA
Output Type: Mechanical Switch Output(Cannot Output Voltage!)
Control Mode: WIFI/2G/3G/4G
WorkMode: Self-locking mode (default) & inching mode (Set by APP)
WIFI standard: 2.4GHz
Work Temperature: -40°C~85°C
Work Humidity: 0%~95%RH
Size: 52*28*20mm
Package include:
1x 12V WIFI Relay Module