Schatten BJ-02-STD Banjo Pickup with Rosewood Jack

Schatten BJ-02-STD Banjo Pickup with Rosewood Jack
- The BJ-02 series sensor is designed to work on any banjo. Five string, tenor, six string, open backs; all sound excellent with this pickup.Installation of the pickup system takes about ten minutes and everything that you need to complete the installation is included with the system.
- This particular placement of the sensor allows the pickup to "hear" just what the banjo is doing. The center foot of the bridge is driving the element directly for maximum output and clarity and it is due to this same placement of the element that also gives the BJ-02's their superior anti-feedback characteristics. It is very difficult for feedback to drive the pickup in reverse due to the overall stiffness of the bridge area.
- On a 'normal' banjo with a three footed bridge, the pickup is to be installed on the underside of the head directly under the centre foot of the bridge. On tenor banjos or banjos having a two footed bridge, the suggested placement for the pickup is on the underside of the head directly under the bass side bridge foot.
- The BJ-02 comes with a simple metal jack assembly that clamps to the tensioning hooks - the same as our BJ-02 Std and BJ-02 Pro models. The BJ-02 is the only model of banjo pickup with a jack assembly that will fit all standard banjos, as well as the Deering Goodtime banjos. Please read the information in the 'Technical' tab on this page about tensioning hook spacing and Deering Goodtime banjos.
The Schatten BJ-02 Std is a high quality, high output pickup designed to work with any banjo. Tremendous sound is yours, whether you play a 5 string, a 4 string or even a 6 string banjo. It will work flawlessly on any kind of banjo. The BJ-02 Standard pickup is installed on the underside of the banjo head and is usually placed directly under and inline with the center foot of the bridge. The pickup is totally non-damping. It does not interfere in any way whatsoever with natural acoustic tone or output of the banjo. This particular placement of the sensor allows the pickup to "hear" just what the banjo is doing. The center foot of the bridge is driving the element directly for maximum output and clarity. This same placement of the element also gives the BJ-02 Std. its' superior anti-feedback characteristics. It is very difficult for feedback to drive the pickup in reverse due to the overall stiffness of the bridge area. Installation of the pickup system takes about ten minutes and everything that you need to complete the installation is included with the system. On a 'normal' banjo with a three footed bridge the pickup is to be installed on the underside of the head directly under the centre foot of the bridge. On tenor banjos or banjos having a two footed bridge, the suggested placement for the pickup is on the underside of the head directly under the bass side bridge foot. The BJ-02 Std. comes completely wired to our new NBJA rosewood bodied jack assembly. This jack assembly simply clamps to your banjo in the same way a normal arm rest attaches: to the tensioning screws. No modification is necessary to either the banjo or the jack assembly. This pickup has been designed to operate properly and sound terrific without the use of a preamp when plugged into any 'normal' amp (guitar amp, bass amp, etc.).
Country USA
Brand Schatten Design
ItemPartNumber BJ-02
Model BJ-02-STD
Color brown
UPCs 753182385334
EANs 0753182385334
ReleaseDate 0000-00-00

Country	USA
Brand	Schatten Design
ItemPartNumber	BJ-02
Model	BJ-02-STD
Color	brown
UPCs	753182385334
EANs	0753182385334
ReleaseDate	0000-00-00

Schatten BJ-02-STD Banjo Pickup with Rosewood Jack

You might also like...