Wolfwhoop Q3 5.8GHz 0.01/25/200/500/800mW Switchable FPV Video

Wolfwhoop Q3 5.8GHz 0.01/25/200/500/800mW Switchable FPV Video Transmitter with MMCX and FC Uart Support OSD Configuring via Betaflight Flight Controller
- We has already released several VTX’s of different form factors and antenna connectors. The ones that support FC Uart at the moment are the Q1, Q1-Pro, Q1-M, Q3 and Q5. You can choose whichever works for your particular build.
- Dimensions : 36mmX36mm (WXD), Perfect match for FC, like OMNIBUSF4/OMNIBUSF4SD
- Traditional button+ nixie tube display control of frequency and power
- Support parameter remotely adjusted by Betaflight, flight controller, OSD, Compatible with betaflight 3.2 3.3 3.4 3.5 or higher version
- 0.01mW to prevent adjacent channel interference, Integrated Uart, connectable to betaflight FC
This VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern like OMNIBUSF4 and OMNIBUSF4 Pro.
MMCX has more mating cycles and is more robust.

Feartures:
5V output for camera
2S-6S input power supported
LC filter allows ultra clean fpv video
0.01/25/200/500/800mW Switchable
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro)
Support parameter remotely adjusted by Betaflight, flight controller, OSD 5V BEC output, support power for receiver and camera
0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
LED display for indicating CH/Band/Power

Specifications:
Operating Voltage: 7 - 24V
Power supply: 5V camera@under 0.3A max
Output power:
25mw: 120mA @12v
200mw: 200mA @12v
500mw: 280mA @12v
800mw: 330mA @12v
Range: Up to 4km with omnidirectional RHCP antennas
Antenna connector: MMCX
Video Format: NTSC/PAL
Port connector: JST,6pin
Dimensions: 36(W)x36(D)mm, 30.5x30.5mm(hole)
Weight:7.4g(excluding antenna)

Note :

5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.

37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.

This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.

Country USA
Brand Wolfwhoop
Manufacturer Wolfwhoop
Binding Electronics
ItemPartNumber Q3
Model 866629
Color Rp Sma Female
Format WMA
ReleaseDate 0000-00-00

Country	USA
Brand	Wolfwhoop
Manufacturer	Wolfwhoop
Binding	Electronics
ItemPartNumber	Q3
Model	866629
Color	Rp Sma Female
Format	WMA
ReleaseDate	0000-00-00

Wolfwhoop Q3 5.8GHz 0.01/25/200/500/800mW Switchable FPV Video Transmitter with MMCX and FC Uart Support OSD Configuring via Betaflight Flight Controller

You might also like...