Ximimark DC12V-50-110℃ W1209WK Digital Thermostat

Ximimark DC12V-50-110℃ W1209WK Digital Thermostat Temperature Control Smart Sensor Waterproof NTC Sensor 1Pcs
- Temperature measurement range: -50 °C ~ 110 °C / Resolution: -9.9-99.9 0.1 °C Other temperature range 1 °C / Measurement accuracy: ± 0.1 ° C / Control accuracy: 0.1 ° C / Hysteresis accuracy: 0.1 ° C / Refresh frequency: 0.5S/high temperature protection: 0-110°C
- Input voltage: DC12V/output: one way 20A relay/power supply: 12V 200MA/machine power consumption: quiescent current ≤35MA, pull-in current: ≤65MA
- Measurement input: NTC (10K0.5%) waterproof sensor
- Environmental requirements: -10 ° C - 60 ° C, humidity 20% - 85%
- Dimensions: 48mm (length) * width 29mm * depth 32mm, opening size: 46 * 26.5mm (1mm = 0.039inch)
Indicator light, digital tube status description:
Indicator light: Off means the relay is off, steady light means the relay is closed.
Digital tube: The above shows that LL is open to the sensor. It shows that HH is out of the measuring range. The thermostat will forcibly open the relay. Display for high temperature protection.

Instructions:
Key Description: The SET button is also the setting button and the C/F button is the Fahrenheit and Celsius conversion buttons.
Press the SET button while the actual temperature is displayed, the lower setting number flashes (the lower setting temperature flashes), then SET(+) C/F(-) to set the desired setting temperature. 3 seconds automatically confirms the return, at this time the controller automatically performs relay on/off according to the set temperature. The rated output of the thermostat is 12V20A relay, which satisfies all kinds of high power, please ensure the line is correct.
Under normal working conditions, short press the C/F (-) button to switch between Fahrenheit and Celsius.
Under normal working conditions, press and hold the SET button 5S to enter the main menu settings. Press SET (+), C/F (-) to select the P1-P8 mode. After confirming the mode, press and hold SET (+) at the same time. , C / F (-) enter the mode setting parameters. At this time, the number below is flashing, and then the parameters are adjusted by SET (+), C/F (-), and automatically saved after 3S. The setup is complete.

Note:
The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 1Pcs
Country USA
Brand Ximimark
Manufacturer Ximimark
Binding Unknown Binding
ItemPartNumber B07K7KJ788
Model B07K7KJ788
UPCs 657835629151
EANs 0657835629151
ReleaseDate 0000-00-00

Country	USA
Brand	Ximimark
Manufacturer	Ximimark
Binding	Unknown Binding
ItemPartNumber	B07K7KJ788
Model	B07K7KJ788
UPCs	657835629151
EANs	0657835629151
ReleaseDate	0000-00-00

Ximimark DC12V-50-110℃ W1209WK Digital Thermostat Temperature Control Smart Sensor Waterproof NTC Sensor 1Pcs

You might also like...