Chuancheng Bluetooth Circuit Board & Dashboard Cover Replacement for Xiaomi MIJIA M365 Electric Scooter

Installation Steps:
1. Take off the stock display covers (both the top and the bottom units).
2. Remove the screw at the bottom of the panel.
3. Inspect our display and make sure everything looks good after transit.
4. First, install the connector. Make sure pins are aligned correctly (2nd pin from the left on the board has to be untouched!). Insert the connector and install the screw you have removed in step 2. Press the blue button and make sure the screen lights up and works properly as per pictures.
5. Remove adhesive tape which came with our unit. Put on the new display panel and make sure it's fully inserted in place. Watch out for connector cables!
6. Insert button (remove tape again) and light extensions to your bottom panel cover.
7. Reapply the bottom panel cover you removed in step 1.

Package Contents:
1*Installation Instructions 1 * Original M365 Bluetooth Circuit Board 1 * Clear Screen Cover 1 * Screwdriver 1 *Set of Screws 

Important Warning:
Only the Bluetooth board is damaged, not the main controller is damaged, you can directly replace it.

Before you order this Bluetooth circuit board, please confirm whether the fault of your main controller is causing the Bluetooth version to be damaged. If yes, We advise that your controller and Bluetooth circuit board must be replaced with the original one at the same time. otherwise the main controller will cause the Bluetooth circuit board damage again.