eSUN General Purpose Photopolymer Resin for LCD 3D Printers, UV 405nm 500g White
Sold Out / Out of Stock
eSUN General Purpose Photopolymer Resin for LCD 3D Printers, UV 405nm 500g White
Feasting printing speed & Low shrinkage
Compatible to most dlp with LED UV
Low odour and no toxic
High hardness 88 shore D
Any Color available
Product: eSUN General Purpose Photopolymer Resin for LCD and DLP 3D printers, eResin-LC1004 Size: 500ml Color: White Packaged in a durable aluminum bottle
Resin parameters: Solidify wavelength: 395nm to 405nm Hardness (D): 88D Viscosity (25C,mPa.s): 100 to 150 mpa.s Density: 1.07 to 1.12 g / cm3 Shrinkage of Vol.: 3.72%-4.24%
Physical Properties: Flexural strength (Mpa): 59Mpa to 70Mpa Flexural Modulus (Mpa): 1.88 to 2.38 Tensile strength (Mpa): 35Mpa to 42 Mpa Elongation at break (%): 11% to 20% Hardness (D): 88D
Precautions: 1. Storage 1) Keep away from light and sealed at room temperature. 2) It is recommended to store the resin between 15 Celsius and 35 Celsius in its original container. Avoid any dusty or moist environment.
2. Usage: 1) Shake well before use. Avoid any direct sunlight during usage. 2) Keep it away from the children. Do not put in mouth. 3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated. 4) If accidentally contacted, please wash with plenty of water immediately. Seek medical advice if necessary. 5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds.
Before choosing eSUN resins for your LCD/DLP 3D printers, please confirm that the UV wavelength of your 3D printer is 405nm. Thoroughly tested and perfectly compatible to Anycubic Photon and Wanhao D7.